|
|
Verni·prens
products are made of first quality arids, which we select and classify with the strictest criteria.
The Portland cement for its manufacturing is: BL II 42,5 R, Reaching top level resistance.
All our facing blocks and bricks are water repellent. In order to obtain an adequate impermeability it is essential that the mortar used is treated with water repellent liquids.
If it were necessary, we could inform you about the adequate products for this treatment.
The sizes of the blocks and bricks are modulated, they include 1 cm. of joint. In the same way the indicated weights of all our products are approximate.
The finishing of our blocks and bricks is of high quality, and the perfection in the faces and edges is total.
Due to the fact that the raw materials which compose these products are natural, there can be differences of shade which can not be considered as manufacturing flaw.
Advice for obtaining a good finishing
In order to obtain a proper finishing in the laying of materials, it is necessary to take away the redundant mortar between the joints when it is beginning to get hard. Once it has been taken away you can redo the joints with a metallic brush up to a depth of 0,5 cm
|
Data Sheets
 |
| |
| |
|
|
|
